Feature Guide References
4.1.2.10 ISDN Service Access by Keypad Protocol
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 17.4 PBX Configuration—[9-4]
Private Network—NDSS Key Table can be specified here.
Value Range
Max. 16 digits (consisting of 0–9)
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
Label Name
Specifies the name of each flexible button for KX-NT366 and KX-NT553/KX-NT556/KX-NT560 IP-PTs, and
KX-UT248 and KX-UT670 SIP-MLTs. The name specified here is displayed on the LCD for each button.
Value Range
Max. 12 characters
Note
The maximum length for KX-UT248 and KX-UT670 labels is 10 characters.
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.21.2 Flexible Buttons
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Value Range
Table 1–Table 8
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
672 PC Programming Manual
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
To Next Page
Loading...
