Panasonic KX-NS500 - Page 726

Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–190
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Value Range
1–64
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Value Range
Automatic, Specific
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.13.2 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are logged in to or logged
out from.
Value Range
None: The incoming call distribution group is selected manually.
726 PC Programming Manual
12.3 PBX Configuration—[4-3] Extension—DSS Console