Feature Guide References
5.1.4 Time Service
Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Extension Number (for DSS)
Specifies the number of an extension to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Extension Number (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Extension Number (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution group for
which messages are checked. If this cell is left empty, the paired extension will check its own messages only.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
728 PC Programming Manual
12.3 PBX Configuration—[4-3] Extension—DSS Console
To Next Page
Loading...
