Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
Trunk Property
Indicates the networking type of each trunk (reference only).
Value Range
Public, Private(TIE), VPN
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
4.2.1 TIE Line Service
4.2.3 ISDN Virtual Private Network (ISDN-VPN)
Distribution Method
Selects the distribution method for incoming trunk calls. The value range of this setting depends on the card
type and Trunk Property assigned for each trunk.
Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
CLI Ring for DIL—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
Value Range
Disable, Enable
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
816 PC Programming Manual
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
To Next Page
Loading...
