Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
Option—DDI/DID Number & Name
Selects the printing format of incoming trunk calls with a DDI/DID number.
Value Range
None, Number, Name, Name + Number
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
Option—Secret Dial
Selects the printing format of calls with a secret dial. The secret dial conceals all or part of the dialled number.
Note that selecting Dial before ARS Modification in Option—ARS Dial on this screen indicates the dialled
numbers as dots regardless of this setting.
Value Range
Print "...." (Secret), Print Dialled Number
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.6.1 Memory Dialling Features—SUMMARY
2.22.1.1 Station Message Detail Recording (SMDR)
Option—Privacy Mode
Selects whether private dialling is enabled or disabled, and how many digits to hide when enabled.
To enable this setting,
Print Information—Outgoing Call on the SMDR tab should be set to Print.
Value Range
Print Dialled Number: Disables private dialling; all dialled numbers are shown on SMDR.
No Print: No dialled number will be shown on SMDR.
Print "X", Print "XX", Print "XXX", Print "XXXX": The selected number of digits at the end of dialled telephone
numbers, and any additional digits dialled after connection, are shown on SMDR as "X".
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
PC Programming Manual 835
19.1 PBX Configuration—[11-1] Maintenance—Main
To Next Page
Loading...
Need help?
General
