Error Log for UM Port Busy—Detection Busy Threshold Time
Enables error information to be logged in the PBX if UM ports were all busy time specified in Detection Busy
Threshold Time. This item is recorded by Syslog. If this Log is frequently recorded in your customer, it indicates
insufficiency of UM port. Recommend to purchase Activation Keys for expand UM port.
Value Range
3-300 (sec)
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
PC Programming Manual References
7.3.2 Utility—Log—Syslog
Error Log for Centralised VM—Network MSW Transmission (Counter)
Enables error information to be logged in the PBX if network message waiting information is deleted after
re-transmission is repeated for the number of times specified in
Network MSW Data Transmission for
Centralised VM Feature—Data Re-transmission : Repeat Counter in 17.2 PBX Configuration—[9-2]
Private Network—Network Data Transmission.
Value Range
Disable, Enable
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table—
Enhanced QSIG Call Information (Activation
Key Required)
17.2 PBX Configuration—[9-2] Private Network—Network Data Transmission— Network MSW Data
Transmission for Centralised VM Feature—Data Re-transmission : Repeat Counter
Feature Guide References
4.2.5.2 Centralised Voice Mail
Error Log for Centralised VM—Network MSW Transmission (Buffer)
Enables error information to be logged in the PBX if the quantity of network message waiting information being
re-transmitted is larger than the transmission buffer.
Value Range
Disable, Enable
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
840 PC Programming Manual
19.1 PBX Configuration—[11-1] Maintenance—Main
To Next Page
Loading...
