Panasonic KX-NS500 - Page 866

Feature Guide References
3.2.1.30 Message Waiting Notification—Telephone Device
Telephone Device—Device Notification Timer—Device Interval Time between
Device 1, 2, 3 and Next Device
Specifies how long the PBX waits after sending Message Waiting Notification to Device 1, 2, or 3 before sending
notification to the next device.
Value Range
0–120 min
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Guide References
3.2.1.30 Message Waiting Notification—Telephone Device
E-mail/Text Message Device—Device No. 1, 2, 3—User Name
Specifies the name of the user of the device.
Value Range
Max. 64 characters
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Guide References
3.2.1.28 Message Waiting Notification—E-mail Device
E-mail/Text Message Device—Device No. 1, 2, 3—E-mail Address
Specifies the e-mail address of the device.
Note
• This setting requires the installation of an Activation Key for Unified Messaging E-mail Notification
(KX-NSU2xx) for the number of users that will be accessing their UM mailbox using a client software
programme.
• In the mailbox user’s profile (See 8.1 Users—User Profiles) if Email 1–3 is input in the Contact tab,
and Automatic copy to UM message notification is checked, the e-mail address(es) will be copied
to this setting and overwrite any previously input data here.
Value Range
Max. 128 characters
866 PC Programming Manual
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting