Caller ID Screen
If set to "Yes", subscribers in the Class of Service can hear the pre-recorded names of callers when they receive
calls (Caller ID Screening).
Note
This setting is not available for COS 65 (Message Manager).
Value Range
No, Yes
Maintenance Console Location
21.1 UM Configuration—[2] Class of Service—Call Transfer
Feature Guide References
3.2.1 System Features—3.2.1.9 Caller ID Screening
Notify of Transfer
If set to "Yes", subscribers in the Class of Service will hear "You have a call." when they answer transferred
calls.
Value Range
No, Yes
Maintenance Console Location
21.1 UM Configuration—[2] Class of Service—Call Transfer
Call Transfer to Outside
If set to "Yes", the system allows calls to be transferred to a trunk via the following features: Custom Service,
Caller ID Callback, Call Transfer Service, Personal Custom Service, Call-through Service.
Note
This setting is not available for COS 65 (Message Manager).
Value Range
No, Yes
Maintenance Console Location
21.1 UM Configuration—[2] Class of Service—Call Transfer
Feature Guide References
3.2.1.7 Call Transfer to Outside
PC Programming Manual 899
21.1 UM Configuration—[2] Class of Service