PIN Mode
PIN No.
Specifies a PIN number (or range of PIN numbers using the wild card, " ") for callers from a specific number
or range of numbers that are to be automatically forwarded to a pre-programmed destination. For more
information on using " " with pin numbers, refer to Wild card input for Caller IDs/PINs.
Value Range
0–9, (Max. 20 digits)
Maintenance Console Location
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing
Feature Guide References
3.2.1.35 PIN Call Routing
Description
Specifies a name and/or description of the PIN number.
Value Range
Max. 20 characters
Maintenance Console Location
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing
Feature Guide References
3.2.1.35 PIN Call Routing
Call Transfer for Day, Night, Lunch, and Break service
Specifies the destination to which the call using an assigned PIN number is automatically forwarded. A
destination can be set for each time mode. To disable the setting, select "None". A Mailbox Group number can
be entered here instead of a mailbox number.
Value Range
None: disables this feature.
Custom Service Menu: forwards callers to the specified Custom Service menu.
Extension: forwards callers to the specified extension.
Mailbox: forwards callers to the specified mailbox.
Maintenance Console Location
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing
Feature Guide References
3.2.1.35 PIN Call Routing
912 PC Programming Manual
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing
To Next Page
Loading...
