Panasonic KX-NS500 - Page 938

End Time
Specifies the time of day on the specified date at which to end the holiday service. Click the cell to display an
array of hours and minutes. Select an hour of the day and a minute of the hour to set the time.
Value Range
Hour and Minute
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Guide References
3.2.1.20 Holiday Service
Retain Holiday
If "Yes" is selected, the holiday will not end regardless of the end time setting. To end the holiday setting when
"Yes" is selected and the end time has already passed, set Setting to "Disable" or re-programme the settings
for the holiday.
Value Range
No, Yes
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Guide References
3.2.1.20 Holiday Service
Company Greeting No.
Specify the greeting callers hear when calling the affected trunks or ports during the holiday.
Value Range
None (do not playback): No greeting is heard.
No. 1–32: The selected company greeting is heard.
System Greeting: The following greeting is heard: "Good morning/Good afternoon/Good evening. Welcome
to the Unified Messaging System".
Maintenance Console Location
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Feature Guide References
3.2.1.20 Holiday Service
938 PC Programming Manual
23.4 UM Configuration—[4-4] Service Settings—Holiday Table