Outside Transfer Sequence—EFA Transfer Reconnect Sequence on Busy (Up
to 16 digits / [0-9 * # D F R T , ; N A])
Specifies the sequence the system uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy. This setting should match the settings of the PBX.
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Outside Transfer Sequence—EFA Transfer Reconnect Sequence on No Answer
(Up to 16 digits / [0-9 * # D F R T , ; N A])
Specifies the sequence the system uses to reconnect the line when the party transferred with EFA (External
Feature Access) does not answer. This setting should match the settings of the PBX.
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Outside Transfer Sequence—Call Transfer to Outside Answer Mode
Specifies the answering method the system uses to detect whether the destination party has answered the
transferred trunk call.
Value Range
Guidance: The system plays the following guidance before connecting the line to the destination party: "You
have a call. To answer the call, press [1]. Otherwise, press [2] and hang up." If the destination party presses
"1", he or she will be able to answer the transferred trunk call. The system continues playing this guidance for
964 PC Programming Manual
24.4 UM Configuration—[5-4] System Parameters—Parameters
To Next Page
Loading...
