Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Trunk Group (1–64)—Outside Line Access Sequence for Caller ID Callback (Up
to 16 digits / [0-9 * # D F R T , ; ])
Specifies the sequence of trunk access numbers for Caller ID Callback. This parameter is available when the
system executes Caller ID Callback without using EFA.
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Number of Digits in Telephone Number (1-20)
Specifies the number of digits for local area telephone numbers. According to this parameter, telephone
numbers dialled by the system can be distinguished as either local calls or long distance calls.
Value Range
1–20
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
E-mail Option
E-mail Integration allows the system to send new message notification or to send recorded voice messages
as file attachments to subscribers via e-mail. The following settings must be made in order for the system to
use E-mail Integration features.
Mail Address (Up to 128 ASCII characters)
Specifies the mail address of the Unified Messaging system.
Value Range
Max. 128 characters
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
966 PC Programming Manual
24.4 UM Configuration—[5-4] System Parameters—Parameters
To Next Page
Loading...
