Panasonic KX-TA616 - Page 92

3-42 Features
O
3 Features
OGM1: “This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0.”
OGM2: “This is B company. To contact Mr. A, press 101. To contact Mr. B, press
102.”
Required Settings: [502] “MODE2”
[414]-[416] “DISA1” for the A company outside (CO) line(s).
“DISA2” for the B company outside (CO) line(s).
Case 4: Uses a different OGM when the line is busy – OGM for DISA.
OGM1: “This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0.”
OGM2: “We are sorry. The line is currently busy. If you want to call the operator,
press 0.”
Required Settings: [502] “MODE2”
[414]-[416] “DISA1”
[506] “DISA2”
Case 5: Distributes calls to the UCD group – OGM for UCD.
OGM1: “We are sorry. The line is currently busy. Please hold.”
OGM2: Same as OGM1
Required Settings: [502] “MODE3”
[414]-[416] “UCD”
Case 6: Disconnects a call after the OGM – OGM for UCD.
OGM1: “We are sorry. The line is currently busy. Please hold.”
OGM2: “We are sorry. The line is currently busy. Please call back later.”
Required Settings: [502] “MODE4”
[414]-[416] “UCD”
UCD with
OGM
Outside Call
The call is disconnected.
OGM1
System
OGM2
The line is busy.
DISA with
OGM
To the designated destination
OGM1
System
DISA with
OGM
To the Operator
OGM2
The line is busy.
UCD with
OGM
Outside Call
To the UCD group
OGM1
System
UCD with
OGM
Outside Call
OGM2
The line is busy.
The line is busy.
Outside Call
(If the operator is selected.)
(When the line is free.)
(When the line is free.)