Panasonic MINAS A6 Series - Page 199

3-53
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
4. Inputs and outputs on connector X4
Output Signal and Pin No.
Output Signals (Analog) and Their Functions
Pin
No.
42
Title of
signal
Analog monitor output 2
Related
control mode
P S T F
Symbol
IM
I/F circuit
AO P.3-36
• Denition of the output signal varies with the output of Pr4.18 (analog monitor 2 type).
• The output signal is identical to the analog monitor 2 on the front monitor.
• For output setting, refer to P.4-42 “Details of parameter”
Pin
No.
43
Title of
signal
Analog monitor output 1
Related
control mode
P S T F
Symbol
SP
I/F circuit
AO P.3-36
• Denition of the output signal varies with the output of Pr4.16 (analog monitor 1 type).
• The output signal is identical to the analog monitor 1 on the front monitor.
• For output setting, refer to P.4-42 “Details of parameter”
Output Signals (Others) and Their Functions
Pin
No.
13, 15
17, 25
Title of
signal
Signal ground
Related
control mode
P S T F
Symbol
GND
I/F circuit
—
• Signal ground
• This output is insulated from the control signal power (COM–) inside of the driver.
Pin
No.
50
Title of
signal
Frame ground
Related
control mode
P S T F
Symbol
FG
I/F circuit
—
• This output is connected to the earth terminal inside of the driver.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com