Panasonic MINAS A6 Series - [Class 5] Enhancing Setting

4-52
Default: [ ]
Pr5.00
2nd numerator of electronic gear
Range Unit Default
Related
control mode
0 to 2
30
— 0 P F
Pr5.01
3rd numerator of electronic gear
Range Unit Default
Related
control mode
0 to 2
30
— 0 P F
Pr5.02
4th numerator of electronic gear
Range Unit Default
Related
control mode
0 to 2
30
— 0 P F
Setthe2ndto4thnumeratorofdivision/multiplicationoperationmadeaccordingtothe
command pulse input.
ThissetupisenabledwhenPr0.08commandpulsecountsperonemotorrevolution=0or
full closed controlling.
Whenthesettingvalueis0forpositioningcontrolling,encoderresolutionissetasa
numerator.
Whenthesettingvalueis0forfullclosedcontrolling,bothnumeratoranddenominatoraresetto1.
Pr5.03
*
Denominator of pulse output division
Range Unit Default
Related
control mode
0 to 8388608
— 0 P S T F
Fordetails,refertoP.4-11.
Pr5.04
*
Over-travel inhibit input setup
Range Unit Default
Related
control mode
0 to 2 — 1 P S T F
Setuptheoperationoftherun-inhibition(POT,NOT)inputs.
Setup value Operation
0
POT
Inhibitpositivedirectiontravel
NOT
Inhibitnegativedirectiontravel
[1] DisablePOT,NOT
2 POTorNOTinputactivatesErr38.0Run-inhibitioninputprotection.
4
1. Details of parameter
Setup
[Class 5] Enhancing setting
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com