3
1. Before Using the Products
Check of the Driver Model ... Installation
Describes how to identify and select the desired product and components, how to
read the specications, and how to install the equipment.
2. Preparation
Operating requirements and procedure
Shows the timing chart and the list of parameters, and describes how to make
wiring and to use the front panel.
3. Connection
Wiring ... I/O settings
Shows block diagrams for each control mode and connection diagrams to the host
controllor, I/O settings.
4. Setup
Describes parameters ... JOG running
Shows describes parameters and procedure of test operation.
5. Adjustment
Gain adjustment ... Auto tuning
Describes various adjusting method including auto tuning and manual gain tuning.
6. When in Trouble
Read this section when you encounter trouble or error.
7. Supplement
Contains S-T characteristic diagram, dimensional outline drawing, supplemental
description on communications and operation.
Organization of this manual
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
