EasyManua.ls Logo

Panasonic MINAS A6 Series - Page 9

Panasonic MINAS A6 Series
560 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Make an appropriate mounting of the Product
matching to its wight and output rating.
Failure to heed these require-
ments will result in personal
injury or malfunction.
Observe the specied mounting method and di-
rection.
Use the eye bolt of the motor for transportation of
the motor only, and never use this for transporta-
tion of the machine.
Using it for transportation of the
machine will cause personal
injury or malfunction.
Adjust the motor and driver ambient environmen-
tal condition to match the motor operating tem-
perature and humidity.
Failure to heed these require-
ments will result in personal
injury or malfunction.
Create the specied clearance between the driver
and the control panel inner surface or other de-
vices.
Observe the specied voltage.
Operation from a voltage out-
side the rated voltage will cause
electric shock, personal injury
or re.
Connect the brake control relay to the relay which
is to shut off at emergency stop in series.
Missing of one of these devices
will result in personal injury or
malfunction.
Provide protection device against idling of electro-
magnetic brake or gear head, or grease leakage
from gear head.
No protection will cause per-
sonal injury, damage, pollution
or re.
Use the motor and the driver in the specied com-
bination.
Not using the motor and the
driver in the specied combina-
tion will result in re.
Test-run the securely xed motor without loading
to verify normal operation, and then connect it to
the mechanical system.
Operation using a wrong model
or wrong wiring connection will
result in personal injury.
When any error occurs, remove the cause and
release the error after securing the safety, then
restart.
Not removing the cause of the
error will result in personal in-
jury.
If the driver fails, shut off the power on the power
supply side of the driver.
Allowing a large current to con-
tinue to pass will result in re.
Always keep power disconnected when the power
is not necessary for a long time.
Improper operation will cause
personal injury.
When you dispose the batteries, observe any applicable regulations or laws after
insulating them with tape.
This Product shall be treated as Industrial Waste when you dispose.
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Table of Contents

Other manuals for Panasonic MINAS A6 Series

Related product manuals