57
Setting Inspection Conditions
Deleting a Product Type
1.
In type selecting window, move the cursor onto the product type which you want to delete.
2.
Press the FUNC key and select “Delete” from the displayed menu.
3.
Select “Yes” following the displayed message.
The type is deleted. If you select “No”, deleting is not executed.
Deleting All Product Types
All crated product types can be deleted at a time. When “Template Registration” is set to “Common”, you can
select execute or not separately for initializing all types and clearing all common templates.
Note that once you initialize all types, you can never restore them.
1.
Select "TYPE" > “Initialize” from the menu bar.
The message confirming initialization appears.
If you select “No”, initialization is not executed.
2.
Select "Yes".
After all types are initialized, “Type No.000” is newly created.
When “Template Registration” is set to “Common”
1. Select "TYPE" > “Initialize” from the menu bar. The window to choose whether to initialize all types
or not is displayed.
2.
To initialize all types, select “Yes”. Not to initialize them, select “No”. Selecting “Yes” initializes all
types at the time.
The window to choose whether to clear all common templates or not is displayed.
3.
To delete all common templates, select “Yes”. Not to delete them, select “No”.
The table below shows the data that are initialized (or deleted) by selecting the option of the windows.
Deleting all
common template
Data initialized or deleted
Common templates and all types
To Next Page
Loading...
