Parker 890SD - Page 426

Programming
Page D-82 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Parameter Descriptions
ACCELERATION
PREF: 109.07 Default: 1.00 % Range: 0.01 to 300.00 %
The acceleration at which the distance is added to the phase loop, set in units per second
2
.
ACTIVE
PREF: 109.05 Default: FALSE Range: FALSE / TRUE
Active is set TRUE whenever the block is enable, i.e. the move distance is none zero..
DISTANCE LEFT
PREF: 109.06 Default: —.xx Range: —.xx
A diagnostic showing the distance remaining before the move is complete.
OFFSET
PREF: 109.10 Default: —.xxxx Range: —.xxxx
This diagnostic shows the total position offset generated by the move block. (1.0 = 1 load mechanical revolution)