Parker 890SD - Page 487

Programming
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page D-143
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Parameter Descriptions
FIRST TRIP
PREF: 97.09 Default: 0 Range: see table below
From when a trip occurs until that trip is reset, this parameter indicates the trip source. When several trips have occurred, this
parameter indicates the first one that was detected.
Functional Description
The tables below shows the possible parameter values for FIRST TRIP, and the TRIPS HISTORY function block.
The ACTIVE TRIPS, WARNINGS, DISABLE TRIPS, TRIGGERS 1 and TRIGGERS 2 parameters use a four digit
hexadecimal number to identify individual trips. Each trip has a unique corresponding number as shown below.
Trip Name (MMI) Value Mask User Disable Auto-restart
NO TRIP 0 0x0000 N/A N/A
OVERVOLTAGE 1 0x0001 No Yes
UNDERVOLTAGE 2 0x0002 No Yes
OVERCURRENT 3 0x0004 No Yes
HEATSINK 4 0x0008 No Yes
EXTERNAL TRIP 5 0x0010 No Yes
INPUT 1 BREAK 6 0x0020 Yes Yes
INPUT 2 BREAK 7 0x0040 Yes Yes
MOTOR STALLED 8 0x0080 Yes Yes
INVERSE TIME 9 0x0100 Yes Yes
BRAKE RESISTOR 10 0x0200 Yes Yes
BRAKE SWITCH 11 0x0400 Yes Yes
OP STATION 12 0x0800 Yes Yes
LOST COMMS 13 0x1000 Yes Yes
CONTACTOR FBK 14 0x2000 Yes Yes
SPEED FEEDBACK 15 0x4000 Yes Yes