Parker 890SD - Page 488

Programming
Page D-144 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Trip Name (MMI) Value Mask User Disable Auto-restart
AMBIENT TEMP 16 0x8000 No Yes
MOTOR OVERTEMP 17 0x0001 Yes Yes
CURRENT LIMIT 18 0x0002 No Yes
Trip Name (MMI) Value Mask + User Disable Auto-restart
TRIP 19 (Reserved) 19 0x0004 No No
24V FAILURE 20 0x0008 Yes Yes
LOW SPEED OVER I 21 0x0010 No Yes
PHASE FAIL 22 0x0020 No Yes
ENCODER 1 FAULT 23 0x0040 Yes Yes
DESAT (OVER I) 24 0x0080 No Yes
VDC RIPPLE 25 0x0100 No Yes
BRAKE SHORT CCT 26 0x0200 No Yes
OVERSPEED 27 0x0400 Yes Yes
ANALOG INPUT ERR 28 0x0800 No Yes
INT DB RESISTOR 29 0x1000 No Yes
TRIP 30 (Reserved) 30 0x2000 No No
UNKNOWN 31 0x4000 No Yes
OTHER 32 0x8000 No Yes
MAX SPEED LOW 33 0x8000 N/A N/A
MAINS VOLTS LOW 34 0x8000 N/A N/A
NOT AT SPEED 35 0x8000 N/A N/A
MAG CURRENT FAIL 36 0x8000 N/A N/A
NEGATIVE SLIP F 37 0x8000 N/A N/A
TR TOO LARGE 38 0x8000 N/A N/A
TR TOO SMALL 39 0x8000 N/A N/A
MAX RPM DATA ERR 40 0x8000 N/A N/A