173
4
Playing Back and Deleting Images
Set the output signal format of the HDMI terminal.
1
Turn the camera on.
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
3
Use the four-way controller (23) to select [HDMI Out].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select an HDMI output format.
*1 When [480p] is selected, HDMI output format switches between 480p
[NTSC] and 576p (720×576p) [PAL] depending on the video output
format setting.
6
Press the 4 button.
The setting is saved.
7
Press the 3 button.
The camera returns to A mode or Q mode.
To Select the HDMI Output Format
Auto
The maximum size which the camera
and AV device support is automatically
selected. (Default setting)
1080i 1920×1080i
720p 1280×720p
480p
*1
720×480p
When the HDMI output format is set to [1080i] or [720p], the display may
appear with a screen design that differs from that displayed on the
camera.
Eye-Fi
2/4
NTSC
1080i
720p
480p
MSC
MENU OK
OK
Setting
Video Out
USB Connection
HDMI Out
Auto
Brightness Level
Power Saving
Cancel
To Next Page
Loading...
