Pentax X90 - Page 24

22
*For 4, M appears if the shutter release button is pressed halfway
when [Shake Reduction] in the [A Rec. Mode] menu is set to O (On).
l appears when [Shake Reduction] is set to P (Off).
* 5 and 6 always appear when the shooting mode is set to e, b, c,
a, or E. In other shooting modes, they are displayed only when the
shutter release button is pressed halfway.
* 10 differs depending on the communication status when using an SD
Memory Card with a built-in wireless LAN (Eye-Fi card).
(No indicator) Eye-Fi card is not supported
MN Communicating data
MO Waiting for communication
MP Eye-Fi communication is not allowed
MQ Version is outdated
* Some indications may not appear depending on the shooting mode.
Histogram + Info/Grid Display/No Info Display in Still Picture
Capture Mode
A1 to A18 and B1 appear when “Histogram + Info” is selected. Only B1
appears when “Grid Display” or “No Info” is selected.
F3.5
F 3.5
1/250
1 /25 0
F3.5
1/250
38
3 8
38
12 M
200
200
200
+1.0
+ 1.0
+1.0
A
1
A5 A6 A7 A10A9A8
A
2
A
3
B1
A
4
B2
B3
A19 A20
A18
A14
A17
A16
A15
A13
A12
A11