23
* A3 differs depending on the [D-Range Setting] setting in the [A Rec.
Mode] menu.
P When [Highlight Correction] is set to O
Q When [Shadow Correction] is set to O
O When [Highlight Correction] and [Shadow Correction] are both
set to O
If [Highlight Correction] and [Shadow Correction] are both set to P
(Off), nothing appears in A3.
* For A4, M appears if the shutter release button is pressed halfway
when [Shake Reduction] in the [A Rec. Mode] menu is set to O (On).
l appears when [Shake Reduction] is set to P (Off).
* A8 differs depending on the communication status when using an SD
Memory Card with a built-in wireless LAN (Eye-Fi card).
(No indicator) Eye-Fi card is not supported
MN Communicating data
MO Waiting for communication
MP Eye-Fi communication is not allowed
MQ Version is outdated
* B2 and B3 always appear when the shooting mode is set to e, b, c,
a, or E. In other shooting modes, they are displayed only when the
shutter release button is pressed halfway.
A1
Shooting mode (p.78)
A12
Battery level indicator (p.34)
A2
Face Detection icon (p.70)
A13
Recorded Pixels (p.121)
A3
D-Range Setting icon (
p.130
)
A14
Quality Level (p.123)
A4
Shake Reduction icon (p.132)
A15
White Balance (p.124)
A5
Flash Mode (p.112)
A16
AE Metering (p.128)
A6
Drive Mode (
p.92 - p.97
)
A17
Sensitivity (p.126)
A7
Focus Mode (p.114)
A18
Histogram (p.26)
A8
Eye-Fi communication status
(
p.235
)
A19
EV Compensation (p.76)
A20
Date Imprint setting (p.136)
A9
Digital Zoom/
Intelligent Zoom icon (p.74)
B1
Focus frame (p.67)
B2
Shutter s
peed
A10
Memory status (p.42)
B3
Aperture
A11
Remaining image storage
capacity
To Next Page
Loading...
