Pepperl+Fuchs VBG-EN-K20-D - Function Ground

AS-i EtherNet/IP Gateway
Connections, Displays and Operating Keys
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
13
5.1.1.1 Function ground
• The function ground can be connected either at the ground screw or at the
terminal.
• The function ground should be connected with a cable as short as possible to
guarantee a good EMC property.
• Therefore is to prefer to connect the ground via the ground screw.