AS-i EtherNet/IP Gateway
Connections, Displays and Operating Keys
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
15
5.2.1.1 Function ground
5.2.2 EtherNet/IP interface
EtherNet/IP is attached at the RJ-45 socket on the left housing side. The RJ-45
socket supports 10Base-T networks according to the IEEE 802.3.
• The function ground can be connected either at the ground screw or at the
terminal.
• The function ground should be connected with a cable as short as possible to
guarantee a good EMC property.
• Therefore is to prefer to connect the ground via the ground screw.
To Next Page
Loading...
