Pepperl+Fuchs VBG-EN-K20-D - Get List of Corrupted Slaves (GET_LCS and GET_LCS_R6 (6 CH)); Get List of Activated Slaves (GET_LAS)

AS-i EtherNet/IP Gateway
Command Interface
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
73
8.3.4.5 Get list of corrupted Slaves (GET_LCS and GET_LCS_R6 (6CH))
The call GET_LCS_R6 (6CH) differs to the call GET_LCS in the half long LCS list.
With the bit 2
5
is selected if the upper (=1) or lower (=0) part of the LCS is read.
Read first with 2
5
in order to create a local copy of the LCS. Reading with bit 2
5
=1
transmits the upper part of the copy.
With the call GET_LCS, the List of Corrupted Slaves (LCS) is read out of the AS-i/
EtherNet/IP Gateway.
8.3.4.6 Get list of activated Slaves (GET_LAS)
With this call, the following entry is read out of the AS-i/EtherNet/IP Gateway: The
list of activated slaves (LAS).
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
160
16
2T O circuit
Response (if O ≡ 0)
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
160
16
2T result
37A6A5A4A3A2A1A0A
……
10 31B 30B 29B 28B 27B 26B 25B 24B
Response (if O ≡ 1)
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
160
16
2T result
30A1A2A3A4A5A6A7A
……
10 24B 25B 26B 27B 28B 29B 30B 31B
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
145
16
2T O circuit