AS-Interface
Command Interface
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
86
8.3.5.9 Store actual parameters (STORE_PI)
With this call, the configured parameters stored on the EEPROM are overwritten
with the current, permanently stored (actual) parameters; in other words, the cur-
rent parameters of all AS-i slaves are stored.
8.3.5.10 Write parameter (WRITE_P)
The AS-i slave parameter value transferred with the command is passed on to the
addressed AS-i slave.
The parameter is stored in the AS-i/EtherNet/IP Gateway only temporarily and is
not stored as a configured parameter in the EEPROM!
The AS-i slave transfers its current parameter value in the response (parameter
echo). This can deviate from the value that has just been written according to the
AS-i master specification.
……
10 24B 25B 26B 27B 28B 29B 30B 31B
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
104
16
2T – circuit
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
104
16
2T result
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
102
16
2T – circuit
3 – B slave address
4– parameter
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
102
16
2T result
3 – slave response
Response (if O ≡ 1)
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
To Next Page
Loading...
