AS-Interface
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
50
7.8.6 AS-i master (info)
This function shows information about the version and the features of the AS
-i ma-
ster.
Version xxxxxxxx (date of the firmware)
Feature String xxxxxxxxxxxxxxxx
7.9 Adv. Diagnosis (advanced AS
-i diagnosis)
See also "Advanced Diagnostics for AS-i Masters", chapter 9.
In the menu "Adv. Diagnosis", the following submenus can be found:
• Error Counters
• LCS (list of slaves, that produced a configuration error)
• Fault Detector
7.9.1 Error counters
This list shows the error counter for each single AS
-i slave.
Furthermore the number of power failures on AS
-i (APF) is displayed.
By selecting "Reset", the error counters are reset to 0.
VERSION
20000919
FEATURE STRING 
ZEFO D1.AS.ER
ERROR COUNTERS
LCS
FAULT DETECTOR
ERROR COUNTERS
RESET
 1A - 0 
  2A - 0