AS-Interface
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
30
7.1 EtherNet/IP (main menu)
Within the menu "EtherNet/IP", one of the following submenues can be chosen:
• ARMFIRMWARE
• TCP/IP OBJECT
• ETHERNET OBJECT.
7.1.1 ARM Firmware
This menu displays the current version the ARM FIRMWARE.
ALLOWED permits firmware updates over FTP.
NOT-ALLOWED stops firmware updates over FTP.
7.1.2 TCP/IP Object
This menu comes up to the Ethernet/IP TCP/IP Interface Object (Class code F5)
and enables the configuration of the TCP/IP Stack to check or to modify:
IF Status Attribut 1: Interface Status
IF Capability Attribut 2: Interface Capability Flags
IF Control Attribut 3: Interface Control Flags
Path to Link Obj Attribut 4: Path to physical link object
TCP/IP Configuration Attribut 5: TCP/IP network interface configuration.
ETHERNET/IP
QUICK SETUP
SLAVE ADDR TOOL
SLAVE TEST TOOL
SETUP
IO+PARAM.TEST
DIAGNOSIS
ADV.DIAGNOSIS
AS-I SAFETY
LANGUAGE
DISPLAY CONTRAST
ARM FIRMWARE
TCP/IP OBJECT
ETHERNET OBJECT
NAME:
ETHERNET/IP
VERSION:
20041020
UPDATE VIA FTP:
ALLOWED
IF STATUS
IF CAPABILITY
IF CONTROL
PATH TO LINK OBJ
TCP/IP CONFIG
To Next Page
Loading...
