AS-Interface
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
44
7.7.4 Binary outputs
This function shows the state of the binary outputs for all AS
-i slaves.
0: Output deleted
1: Output set
The binary outputs can be changed after selecting the desired AS
-i slave.
7.7.5 Analog inputs
This function shows the state of the analog inputs for all AS
-i slaves.
The slave-types are characterized as follows:
X - single slave
A - A-slave
B - B-slave
AB - A+B slave
...
The data of the slave B start ex channel 2!
The display is as follows:
AS
-i slave address, hexadecimal 16 bit value, bar display indicating the input or
output value.
An eventual value overflow is displayed by "Overfl" additionally.
BINARY OUTPUTS
D3...D0
1A - 0 1 0 1
2A - 0 1 0 1
3A - 0 0 0 1
ANALOG INPUTS
1 X
2 A
3 B
ANALOG IN 1
0 +2500
1 +17898
2 +32767 OVERFL
3 -20023
To Next Page
Loading...
