AS-i EtherNet/IP Gateway
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
45
7.7.6 Analog outputs
This function shows the state of the analog outputs for all AS
-i slaves.
The display is as follows:
AS
-i slave address, hexadecimal 16 bit value, bar display.
OVERFL displays any value overflows additionally.
The analog outputs can be changed after selecting the desired AS
-i slave.
7.7.7 Parameter
This function shows the hexadecimal value of the current AS
-i parameters for all
AS
-i slaves.
The actual AS
-i parameters can be changed after selecting the desired slave
address.
ANALOG OUTPUTS
1 X
2 A
3 B
ANALOG OUT 1
0 +2500
1 +17898
2 +32767 OVERFL
3 -20023
PARAMETER
I 1A - 0
2A - 2 I 3A - F
4A - E I 5A - 3
To Next Page
Loading...
