Pepperl+Fuchs VBG-EN-K20-D - IF Status; IF Capability; IF Control; Path to Link Object

AS-i EtherNet/IP Gateway
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
31
7.1.2.1 IF Status
This menu indicates the configuration-status.
7.1.2.2 IF Capability
This submenu indicates, which optional configuration options of the TCP/IP stack
are implemented in the control.
7.1.2.3 IF Control
This submenu serves for controlling the configuration options.
7.1.2.4 Path to Link Object
This submenu indicates the connecting path to the Ethernet Object.
IF STATUS
IF CAPABILITY
IF CONTROL
PATH TO LINK OBJ
TCP/IP CONFIG
CONFIGURED
IF STATUS
IF CAPABILITY
IF CONTROL
PATH TO LINK OBJ
TCP/IP CONFIG
BOOTP CLIENT
NO DNS CLIENT
DHCP CLIENT
DHCP-DNS UPD
CFG SETTABLE
IF STATUS
IF CAPABILITY
IF CONTROL
USE BOOTP
DMS DISABLED
USE DHCP
DMS DISABLED
USE STORED VAL.
DMS DISABLED
IF STATUS
IF CAPABILITY
IF CONTROL
PATH TO LINK OBJ
TCP/IP CONFIG
20 - F6 - 24 - 01