Pepperl+Fuchs VBG-EN-K20-D - Addressing; Programming Slave 2 to Address 6

AS-i EtherNet/IP Gateway
Appendix: Installation Instructions
Ausgabedatum: 24.4.2007
154
Zumutbare Änderungen aufgrund technischer Verbesserungen vorbehalten. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs GmbH · 68301 Mannheim · Telefon (06 21) 7 76-11 11 · Telefax (06 21) 7 76 27-11 11 · Internet http://www.pepperl-fuchs.com
15.1.7 Addressing
15.1.7.1 Programming slave 2 to address 6
1x ↓
1x OK
LCD
. 41
SEARCHING SLAVE
1x OK
ETHERNET/IP
QUICK SETUP
SLAVE ADR TOOL
SLAVE TEST TOOL
LCD
SLAVE ADR TOOL
CONNECT NEW SLAVE
LCD
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 3
PRG
LCD
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 6
LCD
. 6
UNKNOWN SLAVE
LCD
SLAVE ADR TOOL
OK
OLD ADDRESS
NEW ADDRESS
PRG
LCD
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 6
PRG
Master Slave
Modul anschließen/Connect
module/Raccordez module/
Collegare modulo/Conecte modulo
2x ESC
1x OK
1x ↓
2x ↓
3x OK
LCD