Pepperl+Fuchs VBG-EN-K20-D - Diagnosis (Normal AS-I Diagnosis); AS-I Circuit

AS-Interface
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 24.4.2007
46
7.8 Diagnosis (normal AS-i diagnosis)
7.8.1 AS-i circuit
To reach this setup menu you have to change the desired AS-i circuit by using the
arrow and the OK buttons.
The function is only implemented in the double master.
It makes possible to change the AS
-i circuit that is currently active for being ope-
rated.
The active circuit is marked by the cursor.
7.8.2 Diagnosis (normal AS-i diagnosis)
The menu "Diagnosis" enables you to choose one of the following submenus:
• Flags (EC-Flags: Execution control flags)
• Actual Config (actual configuration)
• LPF (list of periphery faults)
• AS-i Master (Info)
AS-I CIRCUIT 1
AS-I CIRCUIT 2
FLAGS
ACTUAL CONFIG
LPF
AS-I MASTER