Philips Respironics SimplyGo Mini User Manual

37
SimplyGo Mini User Manual
English
Visual, Audio
Indicators
Description What To Do
1 beep
that repeats every
16 seconds
Technical Fault Alarm
This alarm occurs when
the device has a general
malfunction and the
device is no longer
operating properly�
Press the yellow Alarm
silence button on the
screen to temporarily
silence the alarm, and
the 2nd screen shown
at left appears� Or, press
the Home button on the
device to return to the
Home screen, and the 3rd
screen will appear with
the Technical Fault alarm
symbol in the upper left
corner to indicate the
alarm state�
The device may or may
not shut down depending
on the severity of the
alarm�
Note: The amount of time
it can take for the alarm to
activate from the time the
alarm condition is present
will vary depending on
the technical fault that
occurs�
Change to another
source of oxygen
and contact
your equipment
provider�

Philips Respironics SimplyGo Mini Specifications

General

Battery Duration (Standard Battery)	Up to 4.5 hours
Battery Life	Up to 4.5 hours with standard battery, up to 9 hours with extended battery
Oxygen Concentration	87% to 96% at all settings
Pulse Dose Settings	1 to 5
Recharge Time (Standard Battery)	Approximately 4 hours
Recharge Time (Extended Battery)	8 hours
Operating Altitude	Up to 10, 000 feet (3048 meters)
Sound Level	43 dBA (at pulse dose setting 2)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Altitude Range	Up to 10, 000 feet (3048 meters)
Weight	5 lbs (2.3 kg) with standard battery
Humidity Range	15% to 95% non-condensing