Philips Respironics SimplyGo Mini User Manual

38
SimplyGo Mini User Manual
Visual, Audio
Indicators
Description What To Do
1 beep
that repeats every
16 seconds
Low Battery Alarm
This alarm occurs when
approximately 10 minutes
of battery life remains�
Remaining battery life is
dependent on your device
settings and your activity
level�
Press the yellow Alarm
silence button on the screen
to temporarily silence the
alarm, or press the Home
button on the device to
return to the Home screen,
and the 2nd screen will
appear with the Low Battery
symbol ashing on the
screen�
Note: This alarm could take
up to 60 seconds to activate
from the time the alarm
condition is present�
Replace the battery
or connect to a
power source�
Warm Up Indicator
This symbol indicates to
the user that the O
2
purity
has not yet been sampled
because the system needs
to stabilize� Its duration is at
least 14 minutes�
This symbol appears
onscreen after initial
startup and clears
from the screen
once the device has
reached the minimum
rated Oxygen
Purity� Contact your
equipment provider
if it persists on screen
for several hours after
startup�

Philips Respironics SimplyGo Mini Specifications

General

Battery Duration (Standard Battery)	Up to 4.5 hours
Battery Life	Up to 4.5 hours with standard battery, up to 9 hours with extended battery
Oxygen Concentration	87% to 96% at all settings
Pulse Dose Settings	1 to 5
Recharge Time (Standard Battery)	Approximately 4 hours
Recharge Time (Extended Battery)	8 hours
Operating Altitude	Up to 10, 000 feet (3048 meters)
Sound Level	43 dBA (at pulse dose setting 2)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Altitude Range	Up to 10, 000 feet (3048 meters)
Weight	5 lbs (2.3 kg) with standard battery
Humidity Range	15% to 95% non-condensing