Philips Respironics SimplyGo Mini User Manual

39
SimplyGo Mini User Manual
English
Visual, Audio
Indicators
Description What To Do
1 beep
that repeats every
16 seconds
No Flow Alarm
This alarm occurs when
the device detects there is
no oxygen owing in the
patient cannula�
Press the yellow Alarm
silence button on the
screen to temporarily
silence the alarm, and
the 2nd screen shown
at left appears� Or, press
the Home button on the
device to return to the
Home screen, and the 3rd
screen will appear with
the No Flow (NF) alarm
symbol in the upper left
corner to indicate the
alarm state�
Note: This alarm could
take up to 60 seconds to
activate from the time
the alarm condition is
present�
Check the cannula
for kinks or other
obstructions that
are stopping
oxygen ow
through it�
If alarm persists,
change to another
source of oxygen
and contact
your equipment
provider�

Philips Respironics SimplyGo Mini Specifications

General

Battery Duration (Standard Battery)	Up to 4.5 hours
Battery Life	Up to 4.5 hours with standard battery, up to 9 hours with extended battery
Oxygen Concentration	87% to 96% at all settings
Pulse Dose Settings	1 to 5
Recharge Time (Standard Battery)	Approximately 4 hours
Recharge Time (Extended Battery)	8 hours
Operating Altitude	Up to 10, 000 feet (3048 meters)
Sound Level	43 dBA (at pulse dose setting 2)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Altitude Range	Up to 10, 000 feet (3048 meters)
Weight	5 lbs (2.3 kg) with standard battery
Humidity Range	15% to 95% non-condensing