RAD-900-...
78/138
PHOENIX CONTACT 3827_en_B
Figure 5-10 PSI-CONF software: Individual Settings, Serial Port
Define the wireless modules to which a connection may be established on the “Allowed
Parents” tab under “Individual Settings”. This setting is required, for example, when creating
repeater chains. Repeater chains are used to circumvent obstacles or to set up redundant
wireless paths by means of several repeaters.
Figure 5-11 PSI-CONF software: Individual Settings, Allowed Parents
The “Allowed Parents” tab is only available if the “Line/Mesh” network type has been
selected.
To Next Page
Loading...
