Phoenix Contact RAD-900-DAIO6

RAD-900-...
84/138
PHOENIX CONTACT 3827_en_B
5.9 Startup time of the wireless station
Once a wireless station has been started (power “ON”), the wireless module will take
15 seconds to be ready for operation. Each linked I/O extension module increases the
startup time by 3 seconds.
Startup time of a wireless station = 15 seconds + (number of I/O modules x 3 seconds)
Accordingly, a complete wireless station with 32 I/O extension modules requires a startup
time of 111 seconds. Only after this period of time has elapsed is the wireless station ready
for operation.