Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Preface
1-7
Service Information
Before attempting to clean or repair any assembly in this AED, service personnel
should be familiar with the information provided in the Preventive Maintenance
section.
A qualified service person should inspect any defibrillator that has been
dropped, damaged, or abused to verify that the AED is operating within
performance standards listed in the Performance Inspection Procedure (PIP),
and that the leakage current values are acceptable.
Component replacement for the LIFEPAK 500 AED is limited to those items
accessible at the final assembly level. Component replacement and AED testing
must only be performed by service personnel qualified by appropriate training
and experience.
For servicing and maintaining the LIFEPAK 500 AED, contact your local
Physio-Control service or sales representative. In the U.S., call Physio-Control
Technical Services at 1.800.442.1142. Outside the U.S., contact your local
Physio-Control representative.
To Next Page
Loading...
