Planet WGSW-20160HP - Port-Security; Port-Security Maximum

Command Guide
-139-
Default:
Profile 1
Usage Guide:
To configure time-range profile of PoE for specific interface.
Example:
To configure time-range profile (Profile 3) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe time-range profile3
4.2.65.83 port-security
Command:
port-security
port-security Enable/disable port security per interface.
Default:
Disabled
Usage Guide:
To enable Port-security for specific interface
Example:
To enable Port-security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # port-security
4.2.65.84 port-security maximum
Command:
port-security maximum <Number of addresses : 1-1024>
port-security Enable/disable port security per interface.
maximum Maximum number of MAC addresses that can be learned on this set of interfaces.
<Number of addresses : 1-1024> Number of addresses