Planet WGSW-20160HP - Sflow Collector-Address; Sflow Collector-Port

Command Guide
-297-
4.2.202 sflow collector-address
Command:
sflow collector-address <hostname>
sflow Statistics flow
collector-address Collector address
<hostname> IPv4 address or IPv6 address or hostname identifying the collector receiver
Default:
None
Usage Guide:
To configure the Collector address of sFlow
Example:
To configure the Collector address (10.10.10.10) of sFlow
Switch# configure terminal
Switch (config)# sflow collector-address 10.10.10.10
4.2.203 sflow collector-port
Command:
sflow collector-port <collector_port>
sflow Statistics flow
collector-port Collector UDP port
<Collector Port : 1-65535> Port number
Default:
None
Usage Guide:
To configure the Collector port number of sFlow
Example:
To configure the Collector port number (555) of sFlow
Switch# configure terminal
Switch (config)# sflow collector-port 555