Planet WGSW-20160HP - End

Command Guide
-322-
Default:
None
Usage Guide:
To create the VLAN Profiles
Example:
To create the VLAN Profiles (VLAN 5)
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)#
4.2.225.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)#do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.225.2 end
Command:
end
end Go back to EXEC mode