Planet WGSW-20160HP - Show Snmp User; Show Snmp View

Command Guide
-419-
4.21.95 show snmp user
Command:
show snmp user [ <username> <engineID> ]
show Show running system information
snmp Display SNMP configurations
user User
<Username : word32> Security user name
<Engiedid : word10-32> Security Engine ID
Default:
N/A
Usage Guide:
To display the SNMP User information.
Example:
To display the SNMP User information.
Switch # show snmp user
User Name : default_user
Engine ID : 800007e5017f000001
Security Level : NoAuth, NoPriv
Authentication Protocol : None
Privacy Protocol : None
4.21.96 show snmp view
Command:
show snmp view [ <view_name> <oid_subtree> ]
show Show running system information
snmp Display SNMP configurations
view MIB view configuration
<ViewName : word32> MIB view name
<OidSubtree : word255> MIB view OID
Default:
N/A
Usage Guide:
To display the SNMP viewer information.