Planet WGSW-20160HP - Version; Spanning-Tree Aggregation

Command Guide
-308-
4.2.212.9 version
Command:
version { v1 [ <v1_comm> ] | v2 [ <v2
_comm> ] | v3 [ probe | engineID
<v_word10_to_32> ] [ <securityname> ] }
version Set SNMP trap version
v1 SNMP trap version 1
<V1Comm : word127> SNMP trap community
v2 SNMP trap version 2
<V2comm : word127> SNMP trap community
v3 SNMP trap version 3
<Securtyname : word32> security name
engineID Configure trap server's engine ID
probe Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure Version of SNMP
Example:
To configure Version (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# version v2 planet
4.2.213 spanning-tree aggregation
Command:
spanning-tree aggregation
spanning-tree Spanning Tree protocol
aggregation Aggregation mode
Default:
None
Usage Guide:
To enter aggregation mode of STP