Planet WGSW-20160HP - Show Ip Dhcp Pool

Command Guide
-368-
4.21.33 show ip dhcp pool
Command:
show ip dhcp pool [ <pool_name> ]
show Show running system information
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
pool DHCP pools information
Default:
N/A
Usage Guide:
To display the DHCP pools information.
Example:
To display the DHCP pools information.
Switch # show ip dhcp pool
Pool Name: test
----------------------------------------------
Type is network
IP is 192.168.1.100
Subnet mask is 255.255.255.0
Subnet broadcast address is -
Lease time is 1 days 0 hours 0 minutes
Default router is 192.168.1.1
Domain name is -
DNS servers are 168.95.1.1 8.8.8.8
NTP server is -
Netbios name server is -
Netbios node type is -
Netbios scope identifier is -
NIS domain name is -
NIS server is -
Vendor class information is -
Client identifier is -
Hardware address is -
Client name is -