Planet WGSW-20160HP - Show Ip Arp Inspection Entry

Command Guide
-365-
Example:
To display the ARP Inspection Configuration.
Switch # show ip arp inspection
ARP Inspection Mode : disabled
Port Port Mode Check VLAN Log Type
---- --------- ---------- --------
GigabitEthernet 1/1 disabled disabled NONE
GigabitEthernet 1/2 disabled disabled NONE
4.21.30 show ip arp inspection entry
Command:
show ip arp inspection entry [ dhcp-
snooping | static ] [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
entry arp inspection entries
dhcp-snooping learn from dhcp snooping
static setting from static entries
interface arp inspection entry interface config
Default:
N/A
Usage Guide:
To display the ARP Inspection entry.
Example:
To display the ARP Inspection entry.
Switch # show ip arp inspection entry