Planet WGSW-20160HP - Show Lacp; Show Line

Command Guide
-388-
4.21.59 show lacp
Command:
show lacp { internal | statistics | system-id | neighbour }
show Show running system information
lacp LACP configuration/status
internal Internal LACP configuration
neighbour Neighbour LACP status
statistics Internal LACP statistics
system-id LACP system id
Default:
N/A
Usage Guide:
To display the LACP mode information.
Example:
To display the LACP mode information.
Switch # show lacp internal
Port Mode Key Role Timeout Priority
-------------------- -------- ---- ------ ------- --------
Gi 1/1 Enabled Auto Active Fast 32768
Gi 1/2 Enabled Auto Active Fast 32768
Gi 1/3 Disabled Auto Active Fast 32768
4.21.60 show line
Command:
show line [ alive ]
show Show running system information
line TTY line information
alive Display information about alive lines
Default:
N/A
Usage Guide:
To display the VTY information.
Example:
To display the VTY information.