Planet WGSW-20160HP - Show Snmp Security-To-Group

Command Guide
-418-
4.21.94 show snmp security-to-group
Command:
show snmp security-to-group [ { v1 | v2c | v3 } <security_name> ]
show Show running system information
snmp Display SNMP configurations
security-to-group security-to-group configuration
v1 v1 security model
v2c v2c security model
v3 v3 security model
<SecurityName : word32> security group name
Default:
N/A
Usage Guide:
To display the SNMP Group information.
Example:
To display the SNMP Group information.
Switch # show snmp security-to-group
Security Model : v1
Security Name : public
Group Name : default_ro_group
Security Model : v1
Security Name : private
Group Name : default_rw_group
Security Model : v2c
Security Name : public
Group Name : default_ro_group
Security Model : v2c
Security Name : private
Group Name : default_rw_group
Security Model : v3
Security Name : default_user
Group Name : default_rw_group